O post Accelerometer – KVS52I apareceu primeiro em Kenntech.
]]>The Vibration Sensor – KVS52I Accelerometer is used for the monitoring of vibrations, the measurements follows the NBR 10082 norm, the parameter used is speed, which presents a linear response for a wide frequency range. These values are calculated in mm / S (True-RMS), this represents the total vibration value that can be destructive to the machine.
Our Sensor performs vibration measurement on all three axes, contains an RS-485 output, a 0 to 10V output and a 4 to 20mA .
through the RS-485 output, it is possible to obtain the vibration value of the three axes, the analog outputs from 0 to 10V and 4 to 20mA, must be related to a user-choice axis.
O post Accelerometer – KVS52I apareceu primeiro em Kenntech.
]]>O post Vibration and Temperature Monitors Kenntech – M100E apareceu primeiro em Kenntech.
]]>Kenntech’s Temperature and Vibration Monitors maintains consistent, real-time information on operating efficiency and provides the integrity of the machine and/or assistive devices.
The M100E System records all elements including the operating data collected and processed through a digital panel interconnected to the system that records real-time reading of all operating limits.
Developed for the application in monitoring of mining equipment, cooling towers, motor shafts in the most diverse segments and heavy machinery in general, the system has vibration scale in mm/s and allows to turn off the machine if it exceeds the pre-set value In the setup, as it shut the machine down if the temperature of the cartridge exceeds the preset maximum value.
The system provides instantaneous temperature and vibration readings and has a survivable / overtemperature alarm that operates before the system shuts off the machine, informing the operator of the possibility of damage. In addition to this information, it has a built-in hourmeter that allows programming maintenance routines and monitoring detrition.
– Vibration Range: 0 to 100 mm / s
– Temperature range: 0 to 150 ° C
– Accelerometer: 0 to 5G in Enhanced Aluminum Case
– Accelerometer connection: Loop current (2 wires)
And Thread Connector Type ITC
– PT100 connection: 3-wire – 3 × 26 AWG cable
– Actuation on the machine: NC contact output (Max. 5 A – 250V)
– Audible alarm: output contact NA
– HMI: LCD + Keyboard
– Certifications: temperature and vibration compliance
– Power supply: Conventional 110 / 220V supply (supplied)
– Protection against overvoltage in the network
(Requires local Earth connection)
– electric cabinet (Optional)
– Connections in the cabinet: terminal strip SAK (Optional)
For more information visit our catalog or send us a quote
O post Vibration and Temperature Monitors Kenntech – M100E apareceu primeiro em Kenntech.
]]>O post Kenntech Digital Siren Trigger apareceu primeiro em Kenntech.
]]>
The KT-250 Digital Siren Trigger is an integrated clock timer that is capable of storing up to 55 alarm times, each with duration, output type, and different days of the week. At each scheduled time, it is possible to activate relays which in turn will trigger sirens, alarms or other signaling devices.
This makes it ideal for applications where multiple alarm times are required, such as in nursery schools, Timecards, irrigators, or to control shifts in companies or industries where there may be different times for each day of the week.
Technical information
– Power supply: 12VDC with external bivolt automatic source
– Current consumption: 150mA without any alarms triggered
– Number of alarms: 55
– Maximum audio output power: 5 WRMS
– Number of relay outputs: 2
– Maximum current per relay: 6F
– Connection of each relay: NO + NF
– Fixing: Screws
– Dimensions: 121x80x34 mm
– Other features: Internal battery to keep time counting even when not powered
For more information, visit our catalog or ask us for a quote
O post Kenntech Digital Siren Trigger apareceu primeiro em Kenntech.
]]>O post Kenntech’s Temperature and Vibration Monitor apareceu primeiro em Kenntech.
]]>The Kenntech’s M-200 monitor make its vibration Reading on three-dimensional shape (X, Y and Z axis) and the temperature reading up to 4 different points of the equipment (for example, along the main axis of any big machine.)
That allows a better monitoring of the operating conditions of the machine, providing a reduction in the probability of interruptions of its operation
Other Advantages of the M200 system:
In addition to these advantages, the system can be supplied as an integral part of the equipment supplied by the customer (OEM), being then personalized with logo on the screen and other identifying characteristics
Technical Characteristics
Vibration Range: 0 to 100 mm/s;
Temperature Range: 0 to250°C;
Accelerometer: 0 to 5G in reinforced aluminum case (3 axes);
Accelerometer Connection: RS485 / Voltage 0 – 10V / Current 4 – 20mA / through thread connector type ITC;
PT100 connection: 3 wire – 3 x 26 AWG cable (up to 4 sensors);
Actuation on the machine: NG contact output (Max. 5A – 250V);
HMI: LCD Graphic + Keyboard;
Connections on the back panel: Dock connector assembly;
Over-Voltage protection in the network (requires local Earth connection)
Composes the KIT:
Temperature Measuring Module;
Accelerometer KVS52I;
Operation / Use Manual;
Optional:
Electric panel with 24V DC power supply and terminal strip with M200 already mounted;
Cable for 4X26 AWG interconnection;
Valor under consultation (*)
More information in our catalog
O post Kenntech’s Temperature and Vibration Monitor apareceu primeiro em Kenntech.
]]>O post Vibration Switch – Vibrostat KM526B apareceu primeiro em Kenntech.
]]>The Vibrostat (Vibraswitch) KM526B is a “vibration switch” vibration meter used for the protection of Rotary Machines, Cooling Towers, Vertical Shaft Impactors (VSI) and other applications against malfunction and can be detected by monitoring the vibration of the machine.
By performing vibration measurements on all three axes, the Vibration Switch can operate the machine through a relay or thyristor, turning it off when the vibration reaches the preset value.
The measurements are performed following the NBR 10082 standard, and the parameter used is speed, which presents a linear response over a wide frequency range.
These values are calculated in mm / s (True-RMS), representing the total value of vibration that can be destructive to the machine.
The parameters that can be configured through the software are as follows:
Maximum vibration;
Extreme vibration;
Startup time;
Maximum time;
Measuring shaft.
When the limit set in the ‘maximum vibration’ parameter is reached, the Vibration Switch will only operate if this condition is maintained for a longer time than programmed in the ‘maximum time’ parameter and continuously.
The ‘extreme vibration’ parameter represents the value at which the KM526B will act immediately, preventing damage to the machine.
The ‘start-up time’ is the time the Vibrostat will wait to start monitoring, and can be used to wait for a machine to start up, because in the initial moments there may be vibrations that would cause the equipment to act improperly.
When the value measured by the Vibrator exceeds the ‘maximum vibration’ value for a time greater than the ‘maximum time’, or when the ‘extreme vibration’ value is reached, the equipment will act by changing the state of the relay or thyristor, Which is triggered via the RST led on its front.
In normal operation, the ON LED on the front panel will flash, indicating that the KM526 Vibrostat is in operation.
* (Check if our product fits your project)
O post Vibration Switch – Vibrostat KM526B apareceu primeiro em Kenntech.
]]>O post Kenntech Angular Transducer – KAS-200 apareceu primeiro em Kenntech.
]]>
The angular transducer KAS200 is a product designed for applications where it is desired to measure the angular position of a given mechanical system, such as measuring the opening and closing angle of a dam gate.
Every electronic system is coupled to a reinforced and sealed aluminum case providing greater reliability and robustness for industrial environments where operating conditions are extremely adverse (humidity, heat, shock, etc.).
Operation
The KAS200 transducer has an angular variation of up to 3600 ° that allows a high resolution and measurement accuracy, which can vary from 4 to 20mA proportional to the angle of the transducer.
O post Kenntech Angular Transducer – KAS-200 apareceu primeiro em Kenntech.
]]>